HausCraftHausCraft

Shed roof calculator

How tall is the high wall, and how long are the rafters? Pick a size and a pitch and see the single-slope roof framed in 3D.

ft
ft
in 12
in
HausCraft

The plan

Every piece, sized and counted from the sizes you gave.

PieceSizeLengthHow many
Rafter2×612 ft 1 11/16 in7
Barge rafter2×612 ft 1 11/16 in2
Lookout2×61 ft 7 1/2 in10
Corner rafter2×62 ft 7 7/8 in4
Sub-fascia2×613 ft 8 7/8 in2
Blocking2×61 ft 7 1/16 in6
Top plate2×411 ft 5 in2
Top plate2×410 ft 9 in1
Top plate2×49 ft 6 in4
Top plate2×49 ft 5 in2
Stud2×46 in to 2 ft 3 13/16 in36

In all 2×4: 150 ft · 2×6: 174 ft

hauscraft.app/calculators/shed-roof-calculator/

How it is worked out

  • One run of rafters slopes from the low wall up to the high one, at the spacing you choose.
  • The high side is raised on a short framed wall on top of its own wall, with studs 16 in on centre under a plate, as tall as the pitch needs.
  • The two end walls are framed up to the slope the same way.
  • Each rafter is notched over the plate at both walls, and runs on past each to the overhang.
  • A sub-fascia closes the rafters’ ends at the low eave and the high one, and a barge rafter on lookouts runs up each side.
  • A rafter that would need to be longer than a 20 ft board is turned down, and we say why.

We lay out and count the sizes you pick, close enough to plan a weekend and price the lumber. Span tables, your local code and, on a bigger job, an engineer settle what size each board has to be.

Questions

What pitch should a shed roof have?
Your roofing decides. Shingles want a steeper roof than metal or a membrane does, and the maker of yours gives the least pitch it is good for.
How much taller is the high wall?
The pitch times the distance between the two walls’ plates. It is given above the list.
Is this a lean-to?
It frames a shed roof on four walls of its own. A lean-to against a house is the same slope with the house’s wall as its high side, where a ledger carries the rafters.

Talk it over

Ask other owners how they built theirs in Request a build, and when yours is done, show it in Builds and projects: how you went about it, what you’d do again and what you wouldn’t.

From an AI assistant

Add HausCraft’s MCP server, https://hauscraft.app/mcp, to Claude or any assistant that takes one, and ask it for this calculation: it answers with the same list. What it asks, and every calculator.

Other calculators

Vegetables

Herbs

Fruit

Start from your address

Tell Klaus where your house is. He asks a couple of questions about it and lays it out with you.