HausCraftHausCraft

Gambrel roof calculator

Where do a barn roof’s two slopes meet, and how long is each rafter? Pick the two pitches and see both slopes framed, every rafter listed.

ft
ft
in 12
in 12
in
HausCraft

The plan

Every piece, sized and counted from the sizes you gave.

PieceSizeLengthHow many
Rafter2×611 ft 11 3/4 in26
Rafter2×65 ft 8 1/8 in26
Ridge board2×1212 ft 11 1/2 in4
Ridge board2×812 ft 11 1/2 in2
Barge rafter2×611 ft 11 3/4 in4
Barge rafter2×65 ft 8 1/8 in4
Lookout2×61 ft 7 1/2 in16
Corner rafter2×64 ft 3 15/16 in4
Sub-fascia2×612 ft 10 7/16 in4
Top plate2×419 ft 5 in2
Top plate2×411 ft 8 1/2 in4
Top plate2×49 ft 7 1/8 in8
Top plate2×45 ft 7 3/4 in8
Stud2×42 ft 1 3/4 in to 10 ft 4 1/4 in56

In all 2×4: 612 ft · 2×6: 625 ft · 2×8: 26 ft · 2×12: 52 ft

hauscraft.app/calculators/gambrel-roof-calculator/

How it is worked out

  • Each side has two runs of rafters. A steep one rises from the wall to where the slope turns, and a shallow one runs from there to the ridge.
  • The slope turns a quarter of the building’s width in from each wall.
  • Where the two runs meet they butt a board along the turn, as the upper ones butt the ridge board at the peak.
  • Lower rafters are notched over the wall’s plate and run on to the overhang.
  • The gable ends are framed up to the roof in studs, and each rake has a barge rafter on lookouts.
  • What holds a gambrel’s shape, gussets at the turns or a floor across, is yours to add.

We lay out and count the sizes you pick, close enough to plan a weekend and price the lumber. Span tables, your local code and, on a bigger job, an engineer settle what size each board has to be.

Questions

What are the angles of a gambrel roof?
A steep lower slope near 60° with an upper near 30° is a common barn shape. This starts close to that, and both are yours to change.
Where does a gambrel roof break?
Here, a quarter of the width in from each wall. The height of the break follows from the lower pitch.
Does it draw the gussets?
It frames the rafters and the boards they meet on. Gussets and collar ties at the turns are yours to add.

Talk it over

Ask other owners how they built theirs in Request a build, and when yours is done, show it in Builds and projects: how you went about it, what you’d do again and what you wouldn’t.

From an AI assistant

Add HausCraft’s MCP server, https://hauscraft.app/mcp, to Claude or any assistant that takes one, and ask it for this calculation: it answers with the same list. What it asks, and every calculator.

Other calculators

Vegetables

Herbs

Fruit

Start from your address

Tell Klaus where your house is. He asks a couple of questions about it and lays it out with you.