# Floor joist calculator

> How many joists does the floor take, and how long is each? Give it the floor’s size and the joists you mean to use, and see it framed.

Page: https://hauscraft.app/calculators/floor-joist-calculator/

Run it through HausCraft's MCP server (https://hauscraft.app/mcp, streamable HTTP, no key): call `calculate` with

```json
{
  "calculator": "floor-joist-calculator",
  "values": {
    "width": 14,
    "length": 20,
    "depth": 9.25,
    "oc": 16
  }
}
```

A value left out is its start. `covered: true` shows it with subfloor on. It answers with every piece and its size, and a 3D view where the client shows one.

| Key | What | Takes | Start |
|---|---|---|---|
| `width` | Floor width | 6–22 ft | 14 |
| `length` | Floor length | 6–60 ft | 20 |
| `depth` | Joists | 5.5 = 2×6; 7.25 = 2×8; 9.25 = 2×10; 11.25 = 2×12 | 9.25 |
| `oc` | Spacing | 12 = 12 in on centre; 16 = 16 in on centre; 24 = 24 in on centre | 16 |

## How it is worked out

- Joists run the short way across the floor, at the spacing you choose, between rim boards along both sides.
- A rim board closes the joists’ ends on each side, and one runs across each end of the floor.
- A rim longer than a 20 ft board is laid in two or more lengths.
- A ¾ in subfloor goes over the joists.
- A floor whose joists would be longer than a 20 ft board wants a beam or a wall under its middle, so it is turned down, and we say why.

We lay out and count the sizes you pick, close enough to plan a weekend and price the lumber. Span tables, your local code and, on a bigger job, an engineer settle what size each board has to be.

## Questions

**How many floor joists do I need?** The floor’s length divided by the spacing, less one, since the rim boards stand where the first and last would. The list counts them.

**How far can a floor joist span?** A span table answers that, from the joist’s size, its spacing, the wood and the load. Pick the size your table gives and this lays it out.

**Which way do the joists run?** Across the shorter way of the floor, so they are as short as they can be.

## The MCP server

https://hauscraft.app/mcp: streamable HTTP, open, no key. It answers with every piece and its size, or why it can't be built; nothing is stored, and nothing is sized structurally.

Tools: `guide`, `list_calculators`, `calculate`, `build`.

An owner's own properties are there too, once they sign in to HausCraft on a monthly plan and allow the client (OAuth, asked for the first time one is needed): `list_properties`, `new_property`, `show_property` (the property in 3D as it stands), and each of a property's tools, `get_buildings` first, taking its id. A change is kept, and shown in the editor as it is made.

Claude Code: `claude mcp add --transport http hauscraft https://hauscraft.app/mcp`. Claude, ChatGPT and other clients: add it as a remote (custom) connector at that address.
